I’m planning to cover “Mein Teil” by Rammstein on guitar, and I could use some help figuring out the right amp settings to capture that heavy, industrial sound. Does anyone know what settings I should dial in? Also, would I need to use any specific guitar pedals to get closer to the tone? Any advice would be awesome!
I’m planning to cover “Mein Teil” by Rammstein on guitar, and I could use some help figuring out the right amp settings to capture that heavy, industrial sound. Does anyone know what settings I should dial in? Also, would I need to use any specific guitar pedals to get closer to the tone? Any advice would be awesome!
Totally agree! For “Mein Teil,” you need a tight, aggressive sound, so don’t forget to dial in a fair bit of presence and adjust your gain high enough for that crunchy metal feel without going too muddy. As for pedals, if you have something like a Boss Metal Zone, that should get you close to the tone. Otherwise, a high-gain amp setting should do the trick!
I actually covered this song recently! Here’s what worked for me: Bass 5, Mids 3, Treble 6, Gain around 8. Also, add a slight delay for atmosphere during the chorus sections. Rammstein’s sound is pretty thick and powerful but still controlled, so play around with your noise gate, too.
If you want to get really close to the Rammstein sound, try using an amp sim if you’re playing through a computer setup. Some of the presets are amazing for capturing that industrial metal tone. For pedals, I’d go with a distortion or overdrive that’s built for metal something like an Ibanez Tube Screamer can give you a nice balance.